uSkyBlock
What is uSkyblock
uSkyblock is a surviving game that transport you to a small island in mid-air. You need to try and survive with the minimum resources.
You can with the few given items create a cobblestone generator which you can then use to expand your island.
By doing the challenges (command /challenges or /c) you can earn Items, Money, XP and Special permissions. Some of these items you earn are needed to complete the next challenges.
You can play alone or you can invite your friends (/is invite [playername])to build together on your island.
You can set a warp (/is warp [playername] to show off what you have done on your island. This can be turned on or off at the GUI.
You can set your own biome (/is biome [biomename]).
In Talabrek's version there were a lot of questions about the Chest and Ender_Chest in the GUI. This feature is now made optional and can be removed if needed. However I have made an example set (See below the Third Party Plugins) to use to the full extent.
Video Tutorials
By Koz4Christ
If you like this video plz subsribe to his channel, he does a plugin tutorial video every week.
If you would like to have your video tutorial featured on our video tutorial page (preferably in your own language) send me (dutchy1001) a message.
We would like many different language video's to help out as many server owners we can.
Click here for the video tutorial page.
Donations
As there were many questions asked how to donate for our work and time we always said that we are doing this for the community. We, R4zorax and myself (dutchy1001) do this as a hobby and enjoy the time spent on it. R4zorax as the main developer likes coding and solving of the issues you guys and gals find, my contribution is to answer most of you and troubleshoot through your config's, permissions and sometimes joining your servers to see at first hand what goes wrong and help you fix them. I also maintain the uSkyblock server were the latest version is tested.
Since the plugin is free, and the source-code is open-source, we see no need to further our own cause. But! We'd like to use this opportunity to raise money for charities.
So here we go, we have setup a page were you guys and gals can donate on our behalf.
This website will do all the work for us to donate to a good cause.
We've set the bar to £500 and when this is accomplished we will put up a POLL for the next £500 that way you all can have a say too.
To donate visit JustGiving
We also would like to thank you all for the many positive reactions we have received since we took over from Talabrek. Without you all we wouldn't be were we are now, so thank you too.
Last note:
We can not support Minecraft v1.7.xx anymore as there are to many differences between those versions. Cauldron is not supported, for help ask on their forums.
Hi! Can you make translatable all GUI strings or is there any way to translate plugin to another language?
Great plugin.
Many thanks.
@151baccardi
Read here first.
RN]: Trying to delete an island - with no WG region! (skyworld:110.00,150.00,-110.00) [23:10:57 ERROR]: null org.bukkit.command.CommandException: Unhandled exception executing command 'is' in plugin uSkyBlock v2.2-HF9b at org.bukkit.command.PluginCommand.execute(PluginCommand.java:46) [spigot-R0.1-b73910a7b7d.jar:git-Spigot-b73910a-aa92a45] etc etc
All we, wg, vault are latest build
@Jomacy09
depending on which version you use, but in general it should update the files so noone will loose their island.
Before updating we recommend a backup of all the uSkyblock files incase something goes wrong.
In doubt, make a full copy of the server and test it first.
if we are running a later version of this plugin, and we would like to update to the new version. how would one manage to keep all the players islands?
@eryk2000
not sure what to do as I cant reproduce the error you have. Everybody else has it working with 1.7.9/10 and WE/WG v6.
Have you updated to the latest Spigot v1.7.9/10?
@CreepersplaysMC1
It does not need to generate a schematic for the default island that is buildin. Only if you want a custom island you need to add a schematic.
To load you own schematic you need to put the schematic in the \plugins\uSkyBlock\schematics folder.
You need to change the config setting
to the name of your schematic (you don't put the extention ".schematic" with it).
This way all players get your custom as default (no permission needed).
EDIT: Looks like the post has been removed while i was answering.
@dutchy1001
Uh, maybe I haven't written it clear. The same problem with uSkyBlock, I forgot to say that WE is now working. Sorry for a problem
@eryk2000
Sort your WorldEdit problem first, as this needs to be working properly to let WorldGuard do it's work properly.
You might have a corrupt file, redownload it to see if that makes a differance.
@dutchy1001
http://pastebin.com/vwTTTUja same :/ I updated almost all, I wasn't updating 1.8 only ones.
@eryk2000
there are lots of plugins that needs updating or removing, Most "WGRegion...." plugins are outdated or not even needed anymore. This can cause issue's. Check them (all your plugins) and update what can be updated or remove them.
@dutchy1001
When I'm using v6 I can't use WorldEdit commands, I can select with wand (from eq, can't type wand) but I think it's another problem.. I have Java 7.
http://pastebin.com/Q93QJv3a
@eryk2000
Swapping between WorldGuard v5 and v6 is not recommended, this could be a cause too
So stick with the v6 I would recommend.
Do you have Java7 installed?
Can you post a log again from start through pastebin plz.
@dutchy1001
I removed schematic and HoloAPI, tried with WG and WE 6.x and 5.x. Still the same result.
I got a question in github but it's best to be explained here so everyone can have the benefits of it.
All this is possible with uSkyblock.
I'll put it in sections as discribed above (Default, Iron, Gold).
Default:
For this you have to do the minimum changes.
In the config you only change the default "chest" items:
To let everybody starts off with a custom default island you change in the config:
There is no need for a permission here as this applies to everybody.
Which gives 1 of each default item and the island island_default.
If you use the default uSkyblock island you dont need to change the "schematicName"
Iron:
Players that can have this must have the permission usb.schematic.island_iron(this overwrite the island_default).
To give them the extra items you have to work with the "extraPermissions" from the config.You can alter the default "extraPermissions" that are present in the config or you can add your own ones. For this explanation I alter a default "extra-smallbonus".
To let players have these "extra" items they need the permission usb.smallbonus.
Which gives 1 of each item + the default items and the island island_iron.
Gold:
Players that can have this must have the permission usb.schematic.island_gold(this overwrite the island_default).
This works the same as in "Iron" to give the "extra" items.
For this explanation I use "my own" extra.
To let players have these "extra" items they need the permission usb.myowntext.
Which gives 1 of each item + the default items and the island island_gold.
As both Iron and Gold get the "default" chest items you don't need to add these to the "extraPermission" bonusses.
@EpicATrain
yes it supports UUID. We still use names in on our islands but when players change their names it will change everything needed for uSkyblock automatic.
@Jomacy09
This should happen when a player logges into the server, it will update their island and regions.
If a player has changed their name before a version that supports UUID was added to the server it's need to be done manual with the commands /usb island remove (old playername) and then /usb island register (new playername).
They might need to readd the party members after.
@EpicATrain
If it supposed UUID's like EpicATrain asked, will we be able to transfer old islands to the new plugin?
Does this plugin support UUID's? Also, will it convert the old data over to the new plugin?
@ThinkMinecraft25
Without info we cant fix a problem. Read this section pls, click here
@eryk2000
I would try it first without the schematic you have and use default island to see if that helps. I would recommend the use of WE/WG v6 and Vault v1.4.1.
I would suggest to look into your HoloAPI for an update or remove the plugin, it seems to cause some big errors in your log.