-----------------------------------------------------------------------------------------------
# See https://dev.bukkit.org/projects/amkmcauth/pages/configyml for original/full description
login:
# Should the plugin be disabled if online mode is on?
disable_if_online_mode: false
# Require a Capcha selection when a player joins the server, default = false?
CapchaOnJoin: false
# Hide/Clear Player Inventory on Join if not logged in (prevents inventory-peeking, default = false)
hide_inventory_on_join: false
# Show usage of menu/inventory/password-block as hint on register/login/changepass? (default = false)
ShowMenuBlockOption: false
# If player is not entering a password, assume automatic 'menu' (inventory) as password block input?
# so if player only enters: t\register, t\l (t\login) or t\changepass (and no password is given)
# AmkMcAuth assumes 'menu' is to be used where the "missing" password should be typed. (Default = false)
AssumeAutoMenu: false
# Require a login to play?
require: true
permission:
# Are you using an permission plugin (like Pex,PermissionX eg.) to allow players to login then you can
# instruct AmkMcAuth to check (set enabled to true) the permission node (node name in permission) on login.
enabled: false
permission: "amkauth.requirelogin"
# New players have to register,
registration: "password"
# Configure: "password" if (default) password registration is used.
# Configure: "email" if email registration is to be used,
# AmkMcAuth will then send a computer generated password to the player's
# email address so they can log in using that password.
# Force players to set Email-Address when they do not have set one? (true/false)
forcesetmail: false
# Interval (in seconds) to remind players to set email address if forcesetmail=true.
emailremindtime: 120
# If you are Using email for player registration (registration: "email") you need to set these too:
regemlfromnice: "Server Nice Name"
regemlfromemail: "Sender-Email-Address"
regemlsmtpservr: "Smtp-Mail-Server"
regemlloginname: "Smtp-Login-name"
regemlloginpswd: "Smtp-Login-Password"
emailsubject: "MineCraft Player Registration Information"
emailbodytxt: "Login Password for Player: %1$s is set to %2$s\nYou can change this after login using the changepassword command\nHappy Mining on our MineCraft Server."
confirmbodytxt: "Confirm your new email-address by issuing\nthis player command: %1$s"
recoversubject: "Requested login password recovery"// recoversubject: "Requested login password recovery"
recoverbodytxt: "Login Password for Player: %1$s is reset to %2$s\nYou can change this after login using the changepassword command\nHappy Mining on our MineCraft Server."
# How long to wait for a player to be kicked (allways) when the login fails on the FIRST
# time when email registration is used (Lock-Out reset on wrong email-address) in seconds
email_wait_kick: 120
# Should a player that is already online and logged-in be kicked if another player attempts to join as him?
kick_if_already_online: false
# Should a player that types in a wrong password immediately be kicked?
kick_on_password_fail: false
# Set players that are not logged in to invisible mode?
invisible_mode: false
# Set players that are not logged in to adventure mode?
adventure_mode: false
# Teleport players to spawn?
teleport_to_spawn: false
# If teleport_to_spawn: true
tpToSpawnTrue:
# Spawn in special world (Default="": use default server spawn setting)
teleportToSpawnWorld: ""
# useSpawnAtLocation to Spawn at specific Location XYZ coordinates (default=false: use default server spawn setting)
useSpawnAtLocation: false
# if useSpawnAtLocation=true: Spawn at this XYZ coordinates location (must be a valid spawn point/block, otherwise horror??)
spawnAtLocationX: 0
spawnAtLocationY: 66
spawnAtLocationZ: 0
godmode:
# Should players that have yet to login have godmode?
enabled: true
after_login:
# Enable god mode after the player logs in?
enabled: true
# Length in seconds
length: 10.0
grace_login:
# Enable god mode if the player re-joins (disconnect/connect)?
enabled: true
remind:
# Remind players to login/register if they have not?
enabled: true
# Interval (in seconds) to remind players to login/register
interval: 10.0
kick:
# Kick players that take too long to log in?
enabled: false
# How long to wait for a player to login before kicking them in seconds
wait: 30.0
restrictions:
chat:
# Allow chat from players NOT logged in?
allowed: false
# If chat.allowed is true, prefix all messages from players not logged in with the following
prefix: "[NLI] "
commands:
# Allow commands from players NOT logged in?
allowed: false
# Commands to be allowed if commands.allowed is false. Useful for on-join commands.
# Aliases can be used unless the command has an argument.
# In the default values, "!" will work for "unstuck," but
# "we cui" will not work for "worldedit cui."
exempt:
- "!"
- "we cui"
movement:
# Allow looking around (only changing vision, not walking)
look_around: true
# Allow walking around (includes changing vision)?
walk: false
# if 'walk' is set to false (no movement), what is the maximum time to Allow walking around
# before players location is reset (could be a NoCheatPlus Bug workaround)?
# time in miliseconds (seconds*1000). Set to zero (0) ignores this setting (this is default).
allowmovetime: 0
emailaddresses:
# emailaddresses to reject on registration and set-emailaddress, add more to reject. Case-insensitive
# AmkMcAuth tests the emailaddress entered by a Player to see if it contains any of these strings.
disallowed:
- "spamgourmet."
- "@guerillamail"
sessions:
# Login sessions. If you log out and log back in, you will not be prompted for a password again if these are configured.
# Enabled login sessions?
enabled: true
# Length in minutes for a session to last. A session starts at player quit.
length: 15.0
# Check the IP of the player logging in again to make sure it matches? This should probably be true.
check_ip: true
# Register/Login/ChangePassword using Command (shows up in Logs) or using hidden Chat messages.
# This controls what helpmessage is shown to User when help is needed.
# Possible Values: "Commands" or "HiddenChat". Default is "Commands".
LoginCommandsMessage: Commands
# You can issue these Console commands on Player-Action. Multiple Lines Allowed.
# It is possible to the $P as a placeholder for the playername in the console command.
# The command usage and format has to follow the command documentation or rules, see tellraw as an axample:
## - tellraw $P ["",{"text":"Amk","color":"aqua"},{"text":"McAuth","color":"green"},{"text":"!","color":"red"}]
# You can delay the command execution several ticks by starting the command with this special parameter: 'AmkWait(DelayTicks)'
# This AmkWait(DelayTicks) parameter will removced from the Commando string before execution of the command.
# where 'DelayTicks' is the number of game-ticks the command has to wait before it is executed, see tellraw as an axample:
## - AmkWait(100) tellraw $P ["",{"text":"Amk","color":"aqua"},{"text":"McAuth","color":"green"},{"text":"!","color":"red"}]
# will issue the command 5 seconds (20 ticks = 1 second) after the event occurs.
#OnJoin, If a player connects to the server (Join Event)
OnJoin:
- ""
#OnRgstr, After the player is connected and has to register his (new) playername.
OnRgstr:
- ""
#OnGrace, After the player is connected and was LoggedIn before: Grace-Login)
OnGrace:
- ""
#OnLogin, If a player loggs in using "/login" command
OnLogin:
- ""
#OnLogof, If a player loggs off using "/logoff" command
OnLogof:
- ""
#OnExit, If a player disconnects from the server (Leave Event)
OnExit:
- ""
usernames:
# Verify if the username is a valid Minecraft username?
verify: true
# Regular expression to check usernames against. If you don't know regular expressions, don't tinker with this.
regex: "[\\w]{2,16}"
passwords:
# Encryption type to use on passwords. Can be any Java type or AMKAUTH, which is SHA-512 rehashed 25 times.
# Supported HASH-Types: AMKAUTH (Default) RAUTH (old RoyalAuth Default), MD5, SHA-256, SHA-512, BCRYPT.
# BCRYPT can also be used in the form: BCRYPT-x where x is the number of BCRYPT GenSalt-Rounds (Default is 10)
hash_type: "AMKAUTH"
# Passwords to reject on registration and warn about on login. Case-insensitive
# The special password: "#NoPlayerName#" means: Player cannot use his PlayerName as a password
# Remove this special password if you allow players to use their playername as password.
disallowed:
- "password"
- "[password]"
- "#NoPlayerName#"
saving:
# Userdata saving options
# How often (in minutes) to save the player profiledata to the disk. Profiledata will be stored locally
# and accessed locally, but it must be saved to persist. The data will also be saved when the plugin is
# disabled as well (like a server stop/restart). This cannot be set to lower than 1.
interval: 10.0
# Every time a player Joins your server, AmkMcAuth checks to see if the player profiledata
# already has been loaded into memory. If not, it loads it from File or from MySQL.
# How long (in days) should AmkMcAuth keep player profiledata of inactive players in internal memory?
# If the last login time of a player is older then remove_inactive_after DAYS, AmkMcAuth will remove
# this playerdata from internal memory to free up the used memory to store player profiledata.
# The data data is not lost, it will be loaded from File or MySQL if player is logging in again.
# If this is set to 0 (or negative) AmkMcAuth will not remove profiledata of inactive players.
remove_inactive_after: 10
# Should the plugin check for old userdata on startup? This will convert any usernames into UUIDs.
# This should be true at least for the first run on the UUID system. If you are using MySQL (see below)
# this setting is also used to store the player profiledata files into the MySQL database where it is
# managed and protected by MySQL. This will probably take a LONG time if you have a BIG Player-base
# (don't leave it true all the time to speed up server start up time )!!!
check_old_userdata: true
# By default AmkMcAuth stores the player profiledata locally in User Profile files.
# The default is used if there is no mysql_hostname value, like: mysql_hostname: "". If you want to use
# MySQL as storage for the payer profiledata you have to set the mysql_hostname value, like "localhost".
# If this value is set: AmkMcAuth tries to connect to the MySQL database server residing on
# host: mysql_hostname, using port: mysql_portnmbr. After that, AmkMcAuth opens
# database: mysql_database using UserName: mysql_username with Password: mysql_password
# You need to set these values the same as you configured it on the MySQL Database server.
# You can use the mysql_dboption value to set special DatabaseOptions, like don't use SSL.
# If you set the option: mysql_filemode to "Backup" AmkMcAuth is using the User ProfileFiles as a backup
# for the MySQL Database action: All Data is stored in MySQL, and Backupped to Local ProfileFiles.
# So AmkMcAuth can run in three different modes:
# 1: mysql_hostname is empty (""): Only ProfileFiles are used (mysql_filemode is auto-set (defaults) to 'Save'),
# 2: mysql_hostname has hostname (like "localhost") and mysql_filemode: "Backup", Use MySQL and use ProfileFiles as Backup
# 3: mysql_hostname has hostname (like "localhost") and mysql_filemode: "", (empty) use MySQL Exclusively (No ProfileFiles!)
mysql_filemode: "Save"
mysql_hostname: ""
mysql_portnmbr: "3306"
mysql_database: "AmkMcData"
mysql_dboption: "useSSL=false"
mysql_username: "AmkMcUser"
mysql_password: "AmkMcPswd"
general:
# Metrics Enabled by default
metrics_enabled: true
# Controls how many registered users are allowed per IP-Address (check on registration).
# Setting this to zero (0) will disable this feature, no Ip-Address counting on registration.
users_per_ipaddress: 0
# Controls how many registered users are allowed per Email-Address (check on registration).
# Setting this to zero (0) will disable this feature, no Email-Address counting on registration.
users_per_emailaddress: 0
# What language file should AmkMcAuth use? (defaults to en_us.properties). But you can translate it to your native Language.
# More User created language files can be found at: https://dev.bukkit.org/projects/amkmcauth/pages/lang
language_file: "lang/en_us.properties"
# If you have translated your language file and you like it to be public for other users, you can contact me.
# I will then upload it to the Bukkit-AmkMcAuth language website with your name as contributor and maintainer.
-----------------------------------------------------------------------------------------------
Comments