Vote Send
Vote Send
Vote Send - share your votes across multiple servers
Vote send will allow you to make the most from your votes... by sharing them between servers!
This works by listening to the voting events passed from Votifier, breaking them down and resending them to a configurable list of servers.
Installing / Configuring
To install, place the VoteSend.jar file into your plugins folder. The first time it runs it will create a config.yml file which you can edit with details of the target servers.
Once configured simply type /vsreload and you're ready to go. You can also use /sendvote [playername] to send a fake vote to test that it arrives correctly on the target servers.
Commands
- /vsreload
- Reload the VoteSend config
- /sendvote [playername] [servicename]
- Send a test vote with optional service name (e.g. "/sendvote swifteh_ MC-Index")
Configuration
Each server entry in the config is made up from the following details:
- IP
- Target hostname or IP address.
- Port
- Votifier port
- Key
- Votifier public key which can be found in the "plugins/Votifier/rsa/public.key" file for each taget server.
- Custom
- Optional custom service name to send for each vote. This may be useful if you would like to distinguish between "shared" votes and those from an actual server listing site. Set this to '' to forward the original service name.
- Sample config.yml
servers: server2: IP: ip.server2.com Port: 8192 Key: VOTIFIERPUBLICKEY Custom: '' server3: IP: ip.server3.com Port: 8192 Key: VOTIFIERPUBLICKEY Custom: '' anotherserver: IP: ip.server4.com Port: 8192 Key: VOTIFIERPUBLICKEY Custom: 'SharedVotes'
Important
This plugin requires Votifier 1.8 or higher.
DO NOT PUT DETAILS OF YOUR MAIN / HUB SERVER IN THE CONFIG OR YOU WILL HAVE AN INFINITE VOTING LOOP.
PLUGIN IS DEAD. NO SUPPORT.
So right now I have Votifier on all my servers, PVE, Factions, Mini Games and the Bungee which does not have a world. The issue is people are going to be joining through the BungeeCord server's IP and will be redirected to the Lobby. Therefore I'll be putting the BungeeCord server's IP in the Minecraft server lists and all the votes have to go to that server but I cannot put Votifier or VoteSend in the plugin folder as it not the normal plugin folder.
The issue is most likely me just not knowing something so thank you for being patience with me.
@jingomcs
SAME!
EDIT MORE INFORMATION: Also having another problem, and i cant figure out why its doing it. It's only queueing it on some servers and giving this error on the others: [VOTIFIER] Protocol Error. Ignoring packet - Software caused connection abort: recv failed
It appears to be doing it in random order. As sometimes it works on the ones its failing on.
image: http://ximg.co.uk/images/6gybmn61zyzza3g6m2le.png
@rickjaruiz
I also get this error sometimes. It's very frustrating
Need help with this Plugin please contact me Skype : Hiempie2
@Peter234
Send me a your config. And if you could send it too my email so i see it faster that will help: [email protected]
I keep getting this error: http://pastebin.com/U9JVU965 can anyone help?
@Jay98d
I'm not 100% sure this will work but, in your votesend config you clicked 'Enter' before typing the key in, It has to be on one line.
If you have the same ip for all your servers as in Proxy 127.0.0.1 then how do you set this up? I'm trying a diffrent votifier port and see if that works. Wish me luck.
Hi, I've been having a minor issue with Votesend recently. We have 3 servers which require votifier but voting has been working on 2/3 of these servers only. Our survival/build receives votes fine as does our PvP but Skyblock doesn't even receive them. There's no errors in the logs about it, either. It just straight up doesn't receive them.
The ports are correct, the keys are correct, I've regenned the votifier keys & configs multiple times, I've set up skyblock as if it was another server, still no luck. Any help pleaseee?
@jingomcs
What do you mean "for the same hardware" ??
I assume you mean on the same IP?
EDIT: yes I am @AJW_Goat
@Mcraftpete
Hi, Just following up as I belive I have fixed votesend , it just didn't like the ips of each server in the config being 0.0.0.0 some firewalls don't allow null etc which was my problem. so now I type /sendvote mee test and works fine , even when I switch server it gives me the rewards as I log into it. Next part of my problem is getting it to register from server lists like pmc , i have votifier on hub but it is not in the votesend config as could make loop , when i vote on pmc for instance i have nothing stored in my votifier on hub to say it has registered gthe vote , i am sure i am doing it right , is it usually pretty instant or does it take time to get the vote ? Does the votesend take anything from votifier or would votifier on hub still work as normal as in does votesend listen to before or after. Any help would be great :P
Hi, Just having trouble setting up , but looks easy :P I have votesend only on my hub server , should I still have votifier here as well and have it set at 8192 ? On other servers I have galistener and votifier. Public key from other servers is pasted into the votesend config as shown in sample config , but I could only seem to use ip as 0.0.0.0 as nothing else seemed to work at all. When I type /votesend from hub it says cannot find command ? do u think I need to reinstall plugin or something I am doing , maybe it is the missing votifier but I ahev tried this with it added too. Any help would be great.
Hi. So We've been trying hard to solve this problem for weeks, but we can't find resolution so I'm commenting here.
The problem is that on one of the servers (the Skyblock server) on our network is not giving rewards when people vote at all.
The three plugins involved are Votifier, GAListener (To give rewards) and this plugin (To send the votes to all 3 servers in our network)
The GAListener and Votifier configurations and plugin versions are the same as they are on Skyblock as they are on the two working servers. Skyblock GAListener config: http://pastebin.com/8RaE48wv Skyblock Votifier config and key: http://pastebin.com/YgYnfQpc
Here is the Votesend config, from our hub: http://pastebin.com/jN4nJHm0 Skyblock plugins: http://i.imgur.com/ww3ShSy.png
Thank you for reading, any help would be greatly appreciated. Please let me know if you require any additional information for further diagnosis of the problem.
Any chance anyone else is getting this error?
[17:47:26] [Craft Scheduler Thread - 394/WARN]: java.net.UnknownHostException: 76.19.6.123:25524 [17:47:26] [Craft Scheduler Thread - 394/WARN]: at java.net.AbstractPlainSocketImpl.connect(Unknown Source) [17:47:26] [Craft Scheduler Thread - 394/WARN]: at java.net.PlainSocketImpl.connect(Unknown Source) [17:47:26] [Craft Scheduler Thread - 394/WARN]: at java.net.SocksSocketImpl.connect(Unknown Source) [17:47:26] [Craft Scheduler Thread - 394/WARN]: at java.net.Socket.connect(Unknown Source) [17:47:26] [Craft Scheduler Thread - 394/WARN]: at com.swifteh.VoteSend$1.run(VoteSend.java:153) [17:47:26] [Craft Scheduler Thread - 394/WARN]: at org.bukkit.craftbukkit.v1_7_R3.scheduler.CraftTask.run(CraftTask.java:58) [17:47:26] [Craft Scheduler Thread - 394/WARN]: at org.bukkit.craftbukkit.v1_7_R3.scheduler.CraftAsyncTask.run(CraftAsyncTask.java:53) [17:47:26] [Craft Scheduler Thread - 394/WARN]: at java.util.concurrent.ThreadPoolExecutor.runWorker(Unknown Source) [17:47:26] [Craft Scheduler Thread - 394/WARN]: at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source) [17:47:26] [Craft Scheduler Thread - 394/WARN]: at java.lang.Thread.run(Unknown Source)
Not working for you? Getting a huge error message? Check out this tutorial on how to set up votesend! http://youtube.com/watch?v=hT_7JjjTEVs
I get connection refused errors: http://pastebin.com/6rJ9Nmv3 since I don't have the ports for my secondary servers open. Will this cause issues, I'm not noticing any problems.
Very Nice plugin, I followed the tutorial here: http://www.spigotmc.org/threads/using-votifier-with-bungeecord.12451/ And I was well away in under 8 minutes! Thank you to the Dev of this plugin, you saved us a lot of headaches! :)
I seem to be having an infinite loop of votes, and I didn't put any information of my hub server into the VoteSend config, the only Votifier information I put anywhere was into the voting sites, anyone else having this problem or know how to fix it? Thanks.
Update??