BlockParty
BlockParty
Description
BlockParty is a Minecraft minigame plugin. You can easily set up multiple arenas in multiple worlds. After the arena is set up the players have to dance on the floor. A random block is given to each player on every level. After that, the players have to run to a block on the floor with the matching color. If they are not standing on the right one, they are out of the game. You can use your own floor patterns and let the floor create randomly.
Requirements
This plugin requires no other plugins to run. Add these plugins to enable extra features.
- NoteBlockAPI - Needed to play the note block music
Installation
Download the jar file and place it into your plugins folder. A new folder is created (named BlockParty) after the server is started. A few file and sub-folders should be located there.
Configuration
config.yml
# BlockParty configuration
# Locale file located in plugins/BlockParty/Locale/*.yml
LocaleFileName: locale_en.yml
# Saves all data on plugin shutdown. Not necessary
SaveOnDisable: false
# Disables listed sub commands, example:
# DisabledSubCommands: ["help", "reload", "join"]
DisabledSubCommands: []
Chat:
# Chat format when in arena
# Placeholders:
# %ARENA%: Arena player is in
# %NAME%: Player name without formatting (e.g. rank, colors)
# %DISPLAY%: Name with formatting
# %MESSAGE%: Message sent
ArenaChatFormat: "&8[&7%ARENA%&8] &7%DISPLAY% &8> &r%MESSAGE%"
# Separates normal from arena chat
# Useful for non-bungee servers
ArenaPrivateChat: True
# How to use join signs:
# Line 1: [BlockParty]
# Line 2: Arena name (case sensitive)
JoinSigns:
# Enable join signs
Enabled: True
# Update signs every x milliseconds
UpdateMillis: 1000
Lines:
Disabled:
1: "&4[Off-%ARENA%]"
2: "Not available"
3: "&8&l%PLAYERS%/%MAX_PLAYERS%"
4: "&4• Stopped •"
Lobby:
1: "&5[Join-%ARENA%]"
2: "Voting..."
3: "&8&l%PLAYERS%/%MAX_PLAYERS%"
4: "&5• Lobby •"
LobbyFull:
1: "&4[Full-%ARENA%]"
2: "Voting..."
3: "&8&l%PLAYERS%/%MAX_PLAYERS%"
4: "&5• Lobby •"
Ingame:
1: "&8[Ingame-%ARENA%]"
2: "%ALIVE% players alive"
3: "&8&l%PLAYERS%/%MAX_PLAYERS%"
4: "&8• Ingame •"
Ending:
2: "&8&lLobby"
3: "&8&lrestarting..."
BungeeCord:
# When set to "True", players will automatically connect to DefaultArena (see below)
# and will be kicked from the server when leaving the arena.
# This is mostly useful for BungeeCord servers
Enabled: False
# Arena players will connect to when BungeeCord is enabled. Please note the spelling and case sensitivity
DefaultArena: Arena
MusicServer:
# When "True", music playback in browser will be activated. You will need a web server for this
Enabled: False
# Available libraries: "websocket", "jetty", "tcp/ip", "mcjukebox"
WebSocketLibrary: jetty
# Web server port (Not Minecraft server port!)
Port: 8080
Database:
# Use "MySQL" to enable MySQL, "SQL" to store data locally
Method: SQL
# Tables will have this prefix in front of the name
TablePrefix: "bp_"
SQLOptions:
# File to save database to when using SQL
FileName: "database.db"
# MySQL credentials
MySQLOptions:
Host: localhost
Port: 3306
Database: database
Username: username
Password: password
# End of configuration
Arena setup
- Create an arena
- Use the /bp create [arenaName]
- Replace [arenaName] with the name of your arena
- Set the lobby spawn
- Place yourself where you want to have your lobby spawn. Use /bp setspawn [arenaName] lobby
- Players get teleported to this position when they enter the lobby
- Set the boundaries of the arena floor
- Use /bp pos <1|2> to set the positions to your current positions. OR:
- Use /bp wand to get a stick to set the positions via left and right click
- Finally use /bp setfloor [arenaName] to set the floor boundaries for you arena
- Set the game spawn
- Place yourself where you want to have your game spawn. Use /bp setspawn [arenaName] game
- Players get teleported to this position when the game starts
- Enable your arena
- To be able to play in an arena you need to enable it first. Use /bp enable [arenaName]
Thats it for the arena setup. To customize your arena, use ingame commands or head to the [arenaName].yml located in your plugins/BlockParty/Arenas/
folder. Here you can find an example arena config:
Settings:
DistanceToOutArea: 5
TimeToSearch: 8
LevelAmount: 15
MinPlayers: 2
MaxPlayers: 20
LobbyCountdown: 30
TimeReductionPerLevel: 0.5
TimeModifier: 0.1
Enabled: true
EnableParticles: true
EnableLightnings: true
AutoRestart: false
AutoKick: false
EnableBoosts: true
EnableFallingBlocks: false
UseAutoGeneratedFloors: true
UsePatternFloors: true
EnableActionbarInfo: true
UseNoteBlockSongs: false
UseWebSongs: true
EnableFireworksOnWin: true
TimerResetOnPlayerJoin: false
AllowJoinDuringGame: true
EnableScoreboard: false
Name: example
SongManager:
- examplesong.mp3
Signs: []
LobbySpawn:
World: world1.13
X: 119.96556415260845
Y: 64.0
Z: 26.73431969945681
Yaw: -57.567917
Pitch: 35.83339
GameSpawn:
World: world1.13
X: 126.06898491630506
Y: 63.0
Z: 30.055373974750374
Yaw: -57.567917
Pitch: 35.83339
Floor:
A:
World: world1.13
X: 124.0
Y: 62.0
Z: 28.0
Yaw: 0.0
Pitch: 0.0
B:
World: world1.13
X: 127.0
Y: 62.0
Z: 31.0
Yaw: 0.0
Pitch: 0.0
Patterns:
- exampleFloor
Width: 4.0
Length: 4.0
Floor setup
In BlockParty we are using our own format to save block data. We are making use of the Run-length encoding to keep the file as small as possible. You can create your own floors, save and use them.
Creating your own floor
- Build a two dimensional pattern using terracotta, wool and/or glass (all blocks supported in > 1.13)
- Set the boundaries of pattern
- Use /bp pos <1|2> to set the positions to your current positions. OR:
- Use /bp wand to get a stick to set the positions via left and right click
- Save your pattern
- Finally use /bp save [patternName] to save your pattern to the
/plugins/BlockParty/Floors/
folder
- Finally use /bp save [patternName] to save your pattern to the
Add a floor to your arena
- Test your pattern
- This is optional but you may want to test your floor
- Use /bp placepattern [patternName] to test it
- Activate UsePatternFloors
- Make sure you set
UsePatternFloors: true
in your arena config - You can also add patterns in your arena config
- Reload with /bp reload if you have just changed a value
- Make sure you set
- Selecting an initial pattern
- If you name a pattern start it will load first
- Selecting the game over pattern
- If you name a pattern end it will load when the game is over
Remove a pattern
- List the active patterns
- Use /bp listpatterns [arenaName] to list all active patterns for this arena
- Remove a paattern
- Use /bp removepattern [arenaName] [patternName] to list all active patterns for this arena
Web player setup
This is a basic tutorial on how to set up the build in web player.
- Enable the web player
- Head over to the config.yml located in you
plugins/BlockParty/
folder - Make sure to enable your enable the MusicServer
- Make sure to use jetty, other librarys are in development, and a non-blocked port
- Your section should look like this now:
- Head over to the config.yml located in you
MusicServer:
# When "True", music playback in browser will be activated. You will need a web server for this
Enabled: True
# Available libraries: "websocket", "jetty", "tcp/ip", "mcjukebox"
WebSocketLibrary: jetty
# Web server port (Not Minecraft server port!)
Port: 8080
Adding songs
- Add songs to your web player songs folder
- Head over to
plugins/BlockParty/web/songs/
- Place any songs here (e.g. example.mp3)
- Head over to
- Add songs to your arena
- Add them ingame by typing /bp addsong [arenaName] [songName]
- Important: Make sure to also include the file type. You command should look something like this: /bp addsong exampleArena example.mp3
- Add them to your arena config. The config section should look something like this:
SongManager:
- examplesong.mp3
- Enable the use of web player songs
- Make sure
UseWebSongs: true
is set to true in your arena config
- Make sure
Sign setup
You can also use signs to let players join to the arena. Your sign should look something like this:
Line | Content |
---|---|
1 | [BlockParty] |
2 | [arenaName] |
3 | |
4 |
Replace [arenaName] with your arena name.
Customize your sign messages
Head over to your config.yml in the plugins/BlockParty/
folder. You can edit the used text that is displayed on the sign right there.
Permissions
- blockparty.admin
- This provides access to all BlockParty commands (/bp admin)
- blockparty.user
- This provides access to basic BlockParty commands (/bp help)
When a player joins the arena they aren't able to perform any commands? This means that they can't even leave the arena and we have to disable the plugin in order for them to be able to do commands again
Hey why does this plugin spam the crap out of my console?
I have Actionbar installed
http://pastebin.com/fu43Bk1s
hi you can make it CB 1.7.2-R0.2 plese
Can you add vault and reward system for econmy my server needs it if you can thanks
@ScriptJunkie
Why are you even using the a lot of this NMS code? It doesn't seem necessary for the plugin's functionality.
help please! regular users cant use commands after they've done /bp join <arena> once theyre in the lobby they cant use commands is there like a node to this or something? (I already added the admin and the user node still NOTHING.)
When does the website version thingy comes out?
@Milkyway705
still testing updates
Please, update to Spigot 1.8.6. The plugin don't work in this version. Thanks you.
Please add money rewards.. pleeeeaaase=)
Can you make dependency to charsapi ? Will be nice if there can to show safety floor block from blocks like on HiveMC.
my server crash without a dump after i install blockparty, and it trow some exception http://pastebin.com/TzXHfWt6
Hey guys, I see you are finally updating the plugin again. Before you were updating it I was taking it over myself on spigot until you guys came back. Since you have returned I will stop posting updates on the spigot one.
@Leon167
I have one last question. How will take up the webplayer is added? But multiple arenas? In what stage of progress are they? Bug list: 1:If you give with Pearl beneath the floor or outside the arena did not die. (or in any place of the arena) 2:The powerup disappears when you change the floor.
@epicbananaboss1
Yes. I am already working on this
@Leon167 Can you add costumization for signs ?
@epicbananaboss1
I already added scoreboard info, stats, actionbar info and dynamic signs. I just need to fix that multiple arena issue. After that i can release the next build with all these features
@Leon167
After you finish with multiple arenas that feature you add?
@zZdOh
Ok sry. I am going to fix that asap.
@JayRayHay
You should exactly follow the video tutorial above. Set the lobby spawn, than the floor and after that you should set the floor spawn.
Please help me! When I create an arena and make the floor, it works, but when I stop/reload my server, I go into my lobby and right click the sign and it says:"You must set the floor up first" But I DID set one up. :(
Please help me. p.s, like zZdOh said I only made 1 arena
Thank you,
-JRH