VeinMiner 1.8.4

Details

  • Filename
    VeinMiner.jar
  • Uploaded by
  • Uploaded
    Jun 15, 2016
  • Size
    34.13 KB
  • Downloads
    489
  • MD5
    1ad3563831679ccc3b16bbb699bf3563

Supported Bukkit Versions

  • 1.10
  • 1.9

Changelog

Version 1.8.4

  • Fixed an issue that disallowed items such as clay and cocoa beans to not drop their respective amounts (Closes ticket #05)
  • Rewrote the way silk touch, fortune, and drops as a whole are handled (Should still support versions 1.9+ as well)
  • Added a "/veinminer blocklist reset|default" subcommand to reset the blocklist values to default (Permission: veinminer.blocklist.reset)
  • A few minor aesthetic changes with a couple commands
  • Fixed an exception with the PlayerVeinMineEvent

(NOTE: This version has officially dropped support for 1.8.x. 1.10 is now available so only the previous version and the current one are being supported. The API has changed too much for me to continue support. Update your server ASAP.) I may release a future version that supports 1.8, but for now, support is dropped

Version 1.8.3

  • Added "ItemsToInventory" configuration option to set whether vein mined items go directly to your inventory or not (Default: false)

Version 1.8.2

  • The Unbreaking enchantment is now respected for tools
  • Re-added the call for BlockBreakEvent (This time, it will not crash the server. Tested)
  • Prevented the possibility that protected areas could be vein mined
  • Attempt to fix ores from flying all over the place when vein mined
  • Minor internal modifications / optimizations

Version 1.8.1

  • Fixed tool durability not updating properly
  • Fixed tools having a negative durability value
  • Fixed the algorithm ignoring data values during the actual process of vein mining (Oops)

Version 1.8.0

  • Changed the VeinMiner algorithm one last time to make it more accurate
  • The algorithm will now act as a "burst" sequence rather than a "linear" sequence (Fixes ticket 4 - http://dev.bukkit.org/bukkit-plugins/vein-miner/tickets/4-stone-1-not-quite-working-correctly/)
  • The algorithm is now much more accurate with max vein size calculations
  • Changed the default maximum vein size to 32
  • Added a safeguard for the algorithm. It will now attempt a maximum of 10 cycles if max vein size has not been reached (No infinite loops)
  • Added a new sub-command, "/veinminer blocklist list", to display all veinable blocks (and their data) - Permission node: "veinminer.blocklist.list"

Version 1.7.1.2

  • Removed the calls for BlockBreakEvent as it was causing way too many issues (Fixes another fatal crash)

Version 1.7.1.1

  • Please update to this version as soon as you possibly can!!!
  • Fixed an urgent issue that can cause your server to occasionally crash (I apologize if you have experienced this)

Version 1.7.1

  • Not specifying a data value in the blocklist now assumes all data values
  • Removed an accidental data check in one of the API methods
  • Added a "hasSpecificData()" boolean-return method in the VeinBlock class
  • Modified the "/veinminer blocklist" command to function with the new data value support

Version 1.7.0

  • VeinMining now activates a BlockBreakEvent for every block broken within the veinmine action
  • |-> This excludes the initial block, which is fired regardless by the breaking of the block
  • Changed the registration format of VeinMinable blocks. They are now contained under a separate block object
  • |-> These custom block objects allow for the specification of data values
  • Data values can now be specified in the block list by adding a semicolon (;) and a value after the name of the material. More info in the configuration file
  • With the changes to registration formats, there are more methods in the main class for API usage
  • Some permission nodes have been reorganized:
  • |-> "veinminer.blocklist.*" is now a parent permission and allows both of the following:
  • |-> "veinminer.addBlocklist" is now veinminer.blocklist.add
  • |-> "veinminer.removeBlocklist" is now veinminer.blocklist.remove

Version 1.6.0

  • Fixed Lapis/Redstone ores not dropping the proper amount of items
  • Fixed experience not dropping upon breaking experience-dropping ores
  • Changed the plugin to run on less decisions
  • Cleaned up a lot of the back-end side of the code
  • Added new "ActivationMode" configuration mode to determine how VeinMiner should activate

Version 1.5.2

  • Fixed potential issue with breaking veinminable blocks in any grief protection plugins
  • Fixed Fortune duplication of blocks that drop themselves (Iron ore, gold ore, logs, etc.)

Version 1.5.1

  • Fixed Metrics not enabling (Typo in the configuration)
  • Added new "ForceDropSpawn" option to toggle whether items drop in the initial break location or not (default true)
  • Cleaned up the drop handler method
  • Veinminer commands may now be run from the console

Version 1.5.0

  • Compiled for Minecraft 1.9.x support (1.8.x no longer supported. Sorry)
  • BIGGEST CHANGE: Rewrote the VeinMine algorithm to be more efficient, and more accurate and precise when breaking veins
  • |-> The algorithm no longer checks unnecessary blocks
  • |-> Cubic areas are no longer calculated. Instead, only blocks relative to the vein are considered
  • |-> Compacted algorithm size to roughly 20 lines, rather than the previous 200
  • Adding/Removing blocks from the list via command no longer requires case sensitivity
  • Changed the "MaxRadius" config option to "MaxVeinSize", and changed the default value to 20
  • Used proper .name() vs .toString() enum conventions
  • Modified the Fortune pickaxe handling to be more efficient / clean
  • Fixed ArrayIndexOutOfBoundsException from using Fortune on a vein (Surprised no one reported this)
  • Made integer randomization more efficient and finalized
  • Changed configuration loading onEnable to be more efficient
  • Cut a couple of methods down to be simpler
  • Fixed NullPointerException when VeinMining with an empty hand
  • Fixed accidentally registering the block break listener twice? (Don't know what I was thinking)
  • Moved the listener into a separate class to unclutter the main class
  • Added a PlayerVeinMineEvent for the VeinMiner API (Developers are free to listen for this event as per usual)
  • Added support for other plugins that may contain auto-smelt or other custom enchantments

Version 1.4.0

  • Rewrote the algorithm for VeinMining. Should work 100% of the time now
  • Fixed a bug with durability that allowed the tool durability to go into the negatives
  • Added a new boolean configuration option to determine whether you need a tool in hand or not. RequiresTool. Default true
  • Fixed support for the Fortune enchantment while VeinMining
  • Added a new configuration section related to Enchantments
  • |-> Added a new boolean configuration option to determine whether the SilkTouch enchantment is applied or not. Enchantments.SilkTouch. Default: true
  • |-> Added a new boolean configuration option to determine whether the Fortune enchantment is applied or not. Enchantments.Fortune. Default: true

Version 1.3.0

  • Changed all methods to private (not visible to other plugins). They are not necessary for public use
  • Removed the ability to use veinminer when you don't have an item in your hand
  • Added a method to check if the player is holding a tool (Axes, Pickaxes, and Spades)
  • Added a main /veinminer command containing veinminer related commands
  • |-> /veinminer version - Get version information about veinminer
  • |-> /veinminer reload - Reload the configuration file for veinminer (permission: veinminer.reload)
  • |-> /veinminer blocklist add <id> - Add block id's to the block list in the config (permission: veinminer.addBlocklist)
  • |-> /veinminer blocklist remove <id> - Remove block id's from the list in the config (permission: veinminer.removeBlocklist)

Version 1.2.0

  • Added support to VeinMine with Silk Touch
  • Added a check for REDSTONE_ORE and GLOWING_REDSTONE_ORE. If one is on the list, and the other is not, it will automatically add the other
  • Removed the need for an ArrayList to break blocks (Fixes overlap of blocks)
  • Added a toolManager method to handle the breaking of blocks and damaging of tools
  • Completely recoded all algorythmic logic for the VeinMining process
  • Fixed uneven destruction of blocks. Should destroy a proper cubic area
  • Fixed the maxRadius variable being one more than set (i.e. 7 was actually 8 )
  • Changed the default maxRadius to 4 instead of 7 (that's still intensive. 4 should suffice)
  • Removed the onDisable method due to inutility after this update

Version 1.1.0

  • Added Adventure Mode support for VeinMiner
  • Added a permission node to allow the usage of VeinMiner ("veinminer.veinminer". Default: All players)
  • Added an onDisable method to clear some ArrayLists just incase some memory is accidentally left over. It's a safeguard, really.
  • Added a new "VeinMinerUsesDurability" boolean configuration option to determine whether durability on the tool is used or not (default: true)
  • Changed the blocksToBreak array list to public so it is viewable to other plugins, and between classes

Version 1.0.0

  • Initial release. View main page