Mob Stats
MobStats makes the strength of mobs change! The further from the closest origin the mob is, the stronger it is. Mobs at an origin are too weak to survive, but get far enough away and they become so strong that they could kill a player in one shot.
To set up the plugin, download the .jar and place it in your plugins folder. Start your server to create the config file. Open up the config and configure it. Reload your server. Insure that you have Vault in your plugin folder if you want to use the economy features. Run the command replaceall to make sure all mobs are proper and run it again if you encounter vanilla mobs that shouldn't be vanilla.
Features
- Tells players what level zone they are in.
- Commands to tell you where you are.
- Will tell players what zone they are in even after teleporting and respawning.
- Multi World support.
- Configure the message for when a player enters a zone.
- Configure messages sent when a player kills a mob.
- Players can stop themselves from receiving messages for someone killing a mob.
- Configure death messages.
- Choose the origins.
- Worlds can have more than one origin.
- Equations to customize the zone size, mob damage, mob health, experience drops, and money.
- Configure different item drops for different mobs in different zones.
- Configure a maximum and minimum values.
- Change the arrows that skeletons shoot.
- Change the equipment that mobs have based on level and a weighted random.
Commands
zone - Tells the player what zone they are in. ms <on or off> - Turns the messages for when someone kills a mob on and off. replaceall - (for ops and the console only) Checks every entity in the game and replaces them if they aren't the right type to have a level.
Config
NOTE: The level cap has been changed to being integrated with equations.
message
This is the message that gets sent to a player when the player changes zones. When ever you type "+level" it will be replaced with the level of the zone. Type "false" or leave the area blank to turn off that message. This goes for all messages. Kill Message, and Death Message can also have -mob for the type of mob and -player for the name or the player and Kill Messages can also have -exp for the experience earned and -money for the money earned.
origins
Type the name of each world to have origins for under the origins section then place a list of origins for each world by listing them with hyphens before each location. Type the location in the form of x,y,z or type spawn to be the world's spawn point.
equations
There are 5 types of equations, zones which are the change in levels based on distance, damage which is the change in damage based on levels, health which is the change in health based on levels, experience or XP which is the change in experience drops based on levels, and Money is to set the amount of money to provide Players with for killing a mob of a certain level. Type what equation is to be set, then type the type of equation (Quadratic, QWD, QMD, Exponential, EWD, EMD). Make a max area for a maximum value and a min area for a minimum value in each equation, excluding these will set the value to positive and negative infinity respectively.
Types
- Quadratic: Values are a, b, c to be filled in the equation ax^2 + bx + c. Setting a to 0 makes a linear equation, c is the value when x is 0.
- QWD: A Quadratic but the values for a, b, and c can have a d put next to them to multiply that value by the default value of what is being calculated.
- QMD: A Quadratic that gets multiplied by the default value of what is being calculated after it has been calculated. Setup the same as a regular quadratic.
- Exponential: Values ar a, b, c, d, f which are to be filled into a(b^(c(x - d))) + f.
- EWD: The same as a QWD but using an exponential equation instead.
- EMD: The same as a QMD but using an exponential equation instead.
If equations make values too high then it can kill a player but instead of respawning, they go to limbo. They can't be damaged or damage other things.
drops
Type a name for the drop that can be anything in the list under drops. Put a section in with the name of the drop which has a section for Mobs which is a list of mobs, a Start Zone section for the zone where it starts, an End Zone for the zone where it ends, the Odds which is a fraction to place the Odds for if the item is dropped, and Items which is a list of ItemStacks in the form of (item id(#)),(amount). No mobs will set it for all mobs, no Start Zone defaults to 0, no End Zone defaults to endless, and no odds, no denominator for odds or the numerator is larger than the denominator will default to the drop always being dropped. No items will ignore the drop.
equipment
Equipment is the same as Drops except their names are listed under equipment. Also, when putting in items, a third number may be placed to say what equipment slot it is supposed to be in. With out a number, it i just placed based on its the order in which it is listed. If ArrowPro is used, the abbreviation of an arrow can be used to set it to a skeleton.
affected mobs
Type a list of all the mobs that are to be affected by listing them one on top of the other with a hyphen before each mob. Leaving it blank will affect all mobs. By default there is a list of all mobs to be used for a reference. Erasing all these values will have no effect on which mobs are affected.
Source: source
Trying to enable mobstats and this happens:
http://i.imgur.com/gB5LN3H.png
I deleted my config and deleted any reference to tnt but it keeps happening.
Hope this plugin can support EpicBoss ;)
There is a mod called MythicDrops (fork of DiabloDrops), it creates a random drops of enchanted items: http://dev.bukkit.org/server-mods/mythic/
Maybe, you consider an opportunity of linking your mods somehow? It would be awesome, if a mob level affect the chance of dropping a good item.
@Gamerguy14
Nevermind, i fixed it.
I just deleted 'tnt' and it broke.
@poiNt3D
I am unsure, the plugin works perfectly fine on my test server.
Does it work?
When i type "/ms on" or "/ms true" it just keep saying "/ms [on/true and off/false]
I'm not getting any messages about current zone level. My world name is world, as it is in the default config.
@rmh4209
The tnt refers to the use of an arrow in ArrowPro, allowing skeletons to shoot special arrows. The correct fix is to remove it from the equipment either by changing it or deleting the spot. The reason it is in the default config is because the whole drop, and equipment area is there for example, and not because that is a recommended setup.
Getting same error as rmh4209.
any tutorials? too hard :/
@rmh4209
Starting getting a similar error when using this configuration file: http://pastebin.com/CRDsUjjY
On second inspection, it is the exact same error: http://pastebin.com/ezTN4xZe
There's an exception on start with 5.4.4. I had no configuration files. I placed the jar in the plugins folder, started the plugin, and this appeared: http://pastebin.com/ezTN4xZe
Replacing any instance of "tnt" with "46" fixes the issue.
Released a version that supports 1.5.1-R0.2
Please update for 1.5.1! And I see you asking for new names for plugin-
Mob Zones
Mobs by Zones
Zone Control for Mobs
Mob Spawn Zones
Ect,ect
Does ist work with 1.5?
@PanniCraft
Thank you, I wasn't seeing an issue before but now I am and have disabled most of my plug ins so sorry I cant be of any help
Same here.
@BobbySoSlo
When I start the server it says:
"CraftBukkit version git-Bukkit-1.4.7-R1.0-72-g261cacf-b2714jnks (MC: 1.5.1) (Implementing API version 1.5.1-R0.1-SNAPSHOT)"
Should be one of the latest Builds
@PanniCraft
Which build of Bukkit are you running?
Hey there, My Server is running on latest Bukkit Version (1.5) and the newest version of your Plugin (5.4.3). If I start the server I get the following error:
I hope you can fix that ^-^ Your plugin does exactly what I'm looking for!
Why not just StrongerMobs?...
It gives a pretty direct idea for what it does, as I was looking for a plugin that JUST increased the mobs strength and health by area, and didn't give it any crazy freaky powers. :P
Thanks!