Bukkit

What is the problem?
--> Hawkeye stops logging after a random amount of time.

What steps will reproduce the problem?
--> Steps :
1. Setup Hawkeye  (current build)
2. Start server
3. Wait awhile; break something
4. Check it with '/hawk tool'
5a. If there is a recent log entry, repeat 3 and 4 after 10 minutes.
5b. If not, you have a problem.

What version of HawkEye are you using (shown in console during start-up)?
--> HawkEye v1.0.5b

Show me any console errors and/or your start-up console message for HawkEye
--> (none)

Show me your config.yml and/or your config.php (REMOVE YOUR PASSWORD)
--> config.yml = http://pastebin.com/CVEfS15w ... config.php = http://pastebin.com/7A6yE1MN

Have you checked the FAQ page?
--> Didn't see anything about this.

try it with water and lava flow not logging and see if the problem persists

@Bluntyforreal: Go

Thanks for the advice; I'll let it run today with lava flow and water flow logging turned off and report back what happens.

Just a side note: This wasn't a problem pre-1.0.5. It has been an issue only since upgrading.

Thanks.

@Bluntyforreal: Go

Thanks for your comment; this _seems_ to have been successful in averting the problem. Our server has been running on and off for a day and a half now with no problem. I suppose it's not the most appealing solution, however for the time being it works.

Thanks.